The app is divided into three tabs.
Measuring
- Once you open the app or unlock the screen, allow the app to pick up better GPS data. You can see the GPS accuracy in the top left corner and monitor your track to see if it runs smoothly without too many points scattered.
- When ready, put the measuring stick in the water and press the “Start” button while holding the phone close to it
- Allow a certain time before the pickup. The longer the stick stays, the better the measurement. If the current is strong, it is unnecessary to keep it very long since the stick will move enough. The suggested time would be more than a minute for lighter currents and at least 30 seconds for stronger currents.
- When picking up the stick, press the “Stop” button. The app will show the measured values till the next measurement.
GPS track
The GPS track helps you realize when the phone has reliable GPS lock. It should show your approximate movement and the range you have moved should be small if you are standing idle in your boat.
Speed Units and From/To switch
To switch speed units, tap the speed units text and select from options like knots, meters per minute, meters per second, and centimeters per second.
You can select whether the bearing shows the current’s origin or destination. Click on “From:” or “To:” and make your choice.
List
The list shows all the measurements. Swipe left on a single one to delete it, or delete all measurements at once.
Map
The Map tab displays all measurements on the map. Choose to view data from the last hour, last day, or a specific date. The most recent measurement is highlighted with a border and bold text. The arrows are thicker for higher speeds.
